FastoFix Wall Putty

home / Fastofix Products / FastoFix Wall Putty

DESCRIPTION

  • Fasto FIX White Tone Wall Putty is a White Cement based Polymer modified Wall Putty Specially developed as a finish coat to cover unevenness and pinholes in plastered surface and to make the wall / ceiling ready for painting. AS it is white, it can be trated as a based coat for painting.

FEATURES

  • Exvellent Whitest putty
  • Highly water resistant
  • Strong bonding to the base plaster
  • Excellent Smooth finish
  • Excellent workability
  • UV Resistance
  • True color tone of the paint is maintained, primer is not required
  • Protects exoensive paint from dampness, peeling off and flaking.
  • Makes paint durable
  • Paint finish is superior
  • Suitable for interior as well as exterior
  • Reduces paint consumption
  • Avoid frequent repainting
  • Cost-effective
  • Aesthietic look for ceiling, interior and external walls
  • Ease of use at site.

METHOD OF APPLICATION

  • Dampen the surface to be plastered with clean water. Allow excess water to drain off.
  • Using a steel trowel/blade, apply the above mix to a thickness of about -mm level and smoothen the surface.
  • Apply the second coat - mm after the first coat has fully dried and set. in areas of high temperature & low humidity for two days is recommended.
  • The thickness of each coat should not exceed 1mm and total plaster thickmess should not exceed 2mm.
  • Smoothen with a steel trowel, Sand paper if so desired with no. of sand paper.

SPECIFICATION

  • Pot life 115 minutes.
  • Whiteness 90%+
  • Autoclave expansive Nil
  • Workability good.

APPLICATION MIXING

  • Take 300-400ml of clean water for 1kg of Fasto FIX White Tone Wall Putty in a clean bucket. It is very important that Fasto FIX White Tone Wall Putty to be added in water not vice versa.
  • Stir continuously by using electric mixer or by hand to obtain a homogeneous lumpfree paste.
  • Allow the resultant paste to stand for about 10 minutes for the additives to dissolve.
  • Re-mix again for about 2 minutes, The mixture is now ready.
  • Use the mix within 1Hrs.

PACKING

  • 20kg, 40kg, HDP bag

PRECAUTION & LIMITATION

  • Although Fasto FIX product White Tone Wall Putty do not contain any Toxic Material, use rubber gloves while mixing.
  • Precaution should be takes to avoid dust inhalation while handling putty powder or during removal of application marks with fine emery paper-say wearing nose mask.
  • Keep the product out of reach of children.
  • Once putty paste has hardened, it shall not be used by adding water.

SHELF LIFE

  • Factory bags of this product are guaranteed to be of first quality for one (1) year * if stored off the ground in a dry area. Store in a cool & dry place in unopend condition away from direct sunlight.