FastoFix Pre Coat

home / Fastofix Products / FastoFix Pre Coat

Product Specification

  • FastoFix Pre Coat is a water based primer composed of acrylic polymer, it is used as a primer over exterior & interior building walls as well as roofs, slopes before application orvarious exterior and interiorwater based coatings.


  • Good binding of chalky or porous substrates and over coating.
  • Water based with good impermeability.
  • Used as a primer on internal and external surfaces.
  • Suitable for high alkaline substrates.
  • Provides deep penetration thus imparts excellent substrate adhesion.
  • Provides excellent effiorescence resistance due to its chemical.


  • Terraces rooftops of building-cementitious, asbestos, brick false and ceiling, concrete surface. etc. Exterior of buildings & plastered walls.

Application Guidelines

  • Surface Preparation :
    The surface should be clean from any loose growth dust particles or grease or any old flaking paints. Any growth of fungus or algae has to be removed by wire brush followed by water cleaning.
  • All surface crack more cracks up to 5mm width should be filled with crack seal.
  • Crack More than 5 mm and all separation gaps should be filled up with FastoFix Premium SBR Latex modified mortar or as specified.
  • Recommended application system Dilute FastoFix Premium Coat with in proportion of 2 : 1 and stirwell until a uniform consistency in achieved. Apply a single coat of FastoFix Premium Coat & allow it to dryfor3 to 4 hrs. Before commencing to furtherfinish coats.


  • 45 to 50 sq. Feet in two coats. (Coverage may vary depending upon the texture and porosity of the surface.)


  • 1kg,4kg,10kg,20kg


  • By brush, roller & spray.

Technical Specification

  • Nature : Single
  • component Appearance : White
  • Tensile Strength, Nlmm2 : >2.0
  • Bonding strength : Excellent to porous substrates.
  • Density @25°c.glcc : 1.3
  • Weathering resistance : Excellent
  • Efflorescence resistance : No efflorescence in paintfilm

Shelf Life & Storage

  • Shelf life is 12 months from the date of manufacturing.
  • Store in shed, protecting from direct sunlight and awayfrom extreme temperature.
  • In extremely hot temperature condition, store in a temperature controlled environment (i.e. Less than 30°C)